EMC Components

WE-CCMF is a Ceramic Common Mode Filter with compact SMD multi-layer common mode choke for high-speed data lines and provides a extremely high speed differential signaling (>10 Gbit/s switching frequency) and > 30 dB common mode noise suppression in the 2.4 GHz Wi-Fi band.

Power Magnetics

WE-PD 1260 Performance is a SMD Shielded Power Inductor with MnZn core for better ISAT & lower RDC. WE-PD Performance Size 1260 provides up to 120 V operating voltage, AEC-Q200 qualification and is suitable for downsizing because of it`s outstanding performance at same size.

The new THT High Current Inductor for Digital Amplifiers WE-HIDA is a high current MnZn THT inductor with flat or round wire for output filter of digital audio amplifiers. It provides a low RDC and a low THD in switching amplifiers with compact size.

The new THT High Current Inductor for Digital Amplifiers WE-LHMD is a high current MnZn THT inductor with flat or round wire for output filter of digital audio amplifiers. It provides a low RDC and a low THD in switching amplifiers with compact size.

The Metal Alloy Power Inductor WE.MAPI 4020HT is the first WE High Temperature Molded Inductor with AEC-Q200 Grade 0 (-55°C up to +150°C) with low AC losses, low RDC and better reliability because there are no no solder or welding joints.

The WE-WPCC Wireless Power Charging Coil offers now a low profile and light weight Qi coils with thin ferrite that gives extra flex & mechanical robustness and is the WPT coil with adhesive tape backing for attaching to fixtures.

Power Magnetics

Wireless Connectivity & Sensors

You need even more range than normal? Then we recommend our proprietary solution Thebe-II. With the improved reception sensitivity and the extra portion of transmission power, radio ranges of up to 20km can be realized.

The Calypso Wi-Fi radio module is a fully equipped, self-sufficient WIFI module with IEEEE 802.11 b/g/n, extreme high-speed UART up to 3 Mbps and 2.4 GHz and compact design (19 x27.5 x 4 mm).

The Bluetooth Low Energy 5.0 radio module Proteus-II has the possibility to send radio packets with an extended data rate of 2Mbit. In addition, the newly developed "High Throughput Mode" allows the transmission of several radio packets per connection interval and thus multiplies the data throughput up to 200kbit/s.

The new WSEN-ITDS is a high performance, low power 3 axis acceleration sensor with digital I²C output interface. With a selectable measurement range up to ±16g and special features such as FIFO buffer, programmable interrupts and stationary/motion-detecting 4D/6D orientation, the sensor is suitable for vibration monitoring, IIoT and robotics applications.

The new WSEN-PADS is a Piezo-resistive absolute pressure sensor based on MEMS with integrated temperature sensor. Low power consumption, 24-bit pressure output data and digital I²C interface make it ideal for applications such as altitude tracking, weather stations, precise navigation system and improving GPS accuracy.

The new WSEN-PDUS differential pressure sensors are available in 5 different pressure ranges, each with an integrated ASIC, a 24-bit digital pressure output and an integrated temperature sensor, whereby the output values are temperature compensated and calibrated. They can be used, for example, to control air conditioning systems, monitor filters or search for gas leaks.

Electromechanical Components

The new WR-FASTTHT male headers series, designed to carry currents up to 16 A. Multiple blade designs, orientations and pitches available.

The new range of WR-LIF(Low Insertion Force) connectors, where FFC contacts are simply inserted into the compact connector to secure the connection. The primary areas of application are screens and displays.